The softstarter PSTX370-600-70 has a rated maximum operational current of 370 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.
Technical
| Item |
Value |
| Rated Operational Voltage |
208 ... 600 V AC |
| Rated Control Supply Voltage (Us) |
100 ... 250 V AC |
| Rated Control Circuit Voltage (Uc) |
24 V DC |
| Rated Frequency (f) |
50/60 HzMain Circuit 50 / 60 Hz |
| Rated Operational Power - In-Line Connection (Pe) |
(230 V) 110 kW(400 V) 200 kW(500 V) 257 kW |
| Rated Operational Current - In-Line Connection (Ie) |
370 A |
| Rated Operational Power - Inside Delta Connection |
at 230 V 200 kWat 400 V 355 kWat 500 V 450 kW |
| Rated Operational Current - Inside Delta Connection |
640 A |
| Service Factor Percentage |
100 % |
| Overload Protection |
Built-in electronic overload protection |
| Integrated Electronic Overload |
Yes |
| Adjustable Rated Motor Current Ie |
30 ... 100 % |
| Starting Capacity at Maximum Rated Current Ie |
4xIe for 10s |
| Ramp Time |
1 ... 120 second [unit of time] |
| Initial Voltage During Start |
10 ... 99 % |
| Step Down Voltage Special Ramp |
100 ... 10 % |
| Current Limit Function |
1.5 ... 7.5 xle |
| Switch for Inside Delta Connection |
Yes |
| Run Signal Relay |
Yes |
| By-pass Signal Relay |
Yes |
| Fault Signal Relay |
Yes |
| Overload Signal Relay |
Yes |
| Analog Outputs |
0…10 V, 0…20 mA, 4…20 mA |
| Signal Indication Ready to Start/Standby ON (LED) |
Green |
| Signal Indication Running R (LED) |
Green |
| Signal Indication Protection (LED) |
Yellow |
| Signal Indication Fault (LED) |
Red |
| Communication |
Modbus-RTU; Modbus-TCP; Ethernet-IP; EtherCAT; DeviceNet; CANopen; Profibus; Profinet; BACnet-IP; BACnet-MSTP |
| Degree of Protection |
IP00 |
| Terminal Type |
Main Circuit: Bars |
| Connecting Capacity Main Circuit |
Hole Diameter 8.5 mm |
| Connecting Capacity Control Circuit |
Rigid 1 x 2.5 mm² |
| Connecting Capacity Supply Circuit |
Rigid 1 x 2.5 mm² |
| Tightening Torque |
Main Circuit 25 N·m |
| Product Main Type |
PSTX370 |
| Function |
Auto phase sequence detectionAutomatic restartCurrent limitCurrent limit rampDual current limitDynamic brakeElectricity meteringElectronic overload Time-to-coolEmergency modeEvent logFull voltage startJog with slow speed, forward and reverseKeypad passwordKick startLimp mode with two-phase motor control if one set of thyristors is shortedMotor heatingPre-start functionPump cleaningReal time clockSequence startSoft start with torque controlSoft start with voltage rampSoft stop with torque controlSoft stop with voltage rampStand still brakeStart reverse (external contactors)Thyristor runtime measurementTorque limitVoltage sags detection |
| Protection Function |
Bypass open protection; Current imbalance protection; Current underload protection; Dual overload (separate overload for start and run); Earth fault protection / ground fault protection; Electronic overload protection, EOL; Extension IO failure protection; Fieldbus failure protection; HMI failure protection; Locked rotor protection; Max number of starts/hour; Over voltage protection; Phase reversal protection; Power factor underload protection; PT-100 connection; PTC connection; Too long current limit protection; Too long start time protection; Under voltage protection; User defined protection; Voltage imbalance protection |
| Warning Details |
Current imbalance warning; Current underload warning; Electronic overload Time-to-trip; EOL warning; Faulty fan warning; Locked rotor warning; Motor runtime limit warning; Over voltage warning; Phase loss warning (for standby); Power factor underload warning; Short circuit warning (for Limp mode); THD(U) - Total Harmonic Distortion warning; Thyristor overload warning (SCR); Under voltage warning; Voltage imbalance warning |
No Links Available.
